Hyload Original

The benchmark DPC the industry still measures against

Introduced in the 1970s and still trusted on schools, hospitals and housing sites today, IKO Hyload Original is a flexible pitch-polymer damp-proof course with a BBA life expectancy equal to the building. It will not crack in frost, slump in summer heat or leach staining oils into the brickwork—so your cavity trays, sills and parapets stay dry for decades.

Order before 12:00 and spend £200 ex-VAT for free next-working-day delivery. Need take-offs? Call our technical desk on 0118 922 7941.


Why choose Hyload Original?

  • BBA Certificate 95/3133 – approved for all UK exposure zones.

  • High tensile strength & puncture resistance – survives rough site handling.

  • Fully compatible with Hyload double-sided butyl tape and mastic for gas-tight lap joints.

  • Pitch-polymer formulation – flexible below -15 °C; won’t become brittle over time.

  • Widths from 100 mm to 900 mm (see table) + 20 m roll length for fewer laps.

Pair with Hyload Fixing Strip and DPC Pins for rapid, clean installation.


Stock sizes – click to add to basket

Width × LengthProduct linkTypical use
100 mm × 20 mAddBrick cill course / block inner leaf
150 mm × 20 mAddOuter leaf backing tray
225 mm × 20 mAddStandard cavity trays
337.5 mm × 20 mAdd150 mm parapet trays (150 mm lap)
450 mm × 20 mAddWide cavity lintels / stepped trays
600 mm × 20 mAddStructural sills / cavity junctions
750 mm & 900 mmBrowse allParapet & tanking overlaps

Need a cost-effective alternative? See Hyload Trade DPC or Visqueen Polyethylene DPC.


Installation essentials

  1. Lap 100 mm minimum; bond laps with Hyload butyl tape or mastic.

  2. Support large widths (>450 mm) every 450 mm with DPC fixing strip.

  3. Protect from UV – close masonry the same day or cover with temporary sheeting.

  4. Joint to membranes – torch-on or self-adhesive membranes lap 150 mm onto Hyload, warmed with a hot-air gun for fusion.

See our Cavity Trays section for pre-formed options when speed is critical.


Frequently asked questions

Can Hyload Original be used as a gas barrier?

Yes—when fully sealed with Hyload butyl tape it becomes methane-tight; for high-risk brownfield sites upgrade to Visqueen Gas Barriers.

Is priming required?

Only on rough concrete or dusty block—prime with Visqueen Axiom Uniseal.

What’s the shelf life?

Indefinite if stored upright, under cover and away from heat >50 °C.

Can I bond Hyload to stainless steel lintels?

Yes—use Hyload mastic or double-sided tape; clean steel first with solvent wipe.

Delivery cut-off?

Order before noon, spend £200 ex-VAT and check our delivery information for remote-area surcharges.


Complete your damp-proofing package

Need a BBA cert or CAD detail? Contact us or phone 0118 922 7941—Spechunter will chase down every last spec.

Spechunter.co.uk – Chasing down specialist construction specifications since 1988.

...
Showing 1 - 9 of 14 items