- Home
- Visqueen Non-Combustible DPC
Visqueen Non-Combustible DPC
The 2018 change to Building Reg 7(2) bans combustible materials in relevant external walls over 18 m. That rules out traditional polymer DPCs—but not your project. Visqueen Zedex Non-Combustible DPC is a 0.6 mm aluminium/ glass-fibre laminate that achieves Euroclass A1 yet stays flexible enough to dress round corners and lintels. Use it as a damp-proof course, cavity tray or masonry sleeve anywhere fire safety is paramount.
Order before 12:00 and spend £200 ex-VAT for free next-working-day delivery. Need a BBA cert or NHBC letter? Call 0118 922 7941.
Stock sizes – one-click ordering
Width × Roll length | Link | Typical use |
---|---|---|
100 mm × 20 m | Add | Standard brick cill course |
150 mm × 20 m | Add | Inner-leaf starter |
300 mm × 20 m | Add | Horizontal cavity trays |
450 mm × 20 m | Add | Parapets & stepped trays |
500 mm × 20 m | Add | Wide lintels / balcony upstands |
600 mm × 20 m | Add | Lift pits / tanking starters |
Add non-combustible fixing strip for perfectly straight vertical drops.
Why Zedex Non-Combustible beats the alternatives
Euroclass A1 / limited combustibility – fully compliant with Reg 7(2) for buildings above 18 m or any height that adopts stricter fire policies.
BBA Certificate 19/5685 – proven damp and gas resistance.
High tensile & puncture strength – robust on scaffold lifts; won’t tear on brick arrises.
Coloured upper face (red) makes lap checks easy during inspection.
Full system support – pair with Visqueen tapes and High-Bond DPC where self-adhesive laps are required.
Best-practice installation
Support: fix every 450 mm with stainless nails or the dedicated Zedex fixing strip.
Laps: 100 mm minimum; seal with Visqueen Zedex Double-Sided Butyl Tape for water & gas tightness.
Weep vents: insert full-height A1 weep holes at 450 mm centres over every tray.
Movement joints: allow slips at structural movement breaks; bond overlaps on one side only.
Storage: keep rolls flat, dry and shaded—aluminium faces can scuff if dragged.
Compliance snapshot
Standard / requirement | Zedex Non-Combustible performance |
---|---|
BS EN 13501-1 | Euroclass A1 (non-combustible) |
BBA cert | 19/5685 – damp proof & radon barrier |
NHBC Chapter 6.1 | Accepted for use above 18 m |
Radon / methane | <1 × 10⁻¹² m²/s radon permeability |
FAQs
Is it as flexible as polymer DPC?
Yes—aluminium/glass scrim gives enough flex to fold 90 ° without cracking; warm gently in winter for tight bends.
Can I torch-bond it?
No—heat will damage the laminate. Use butyl tapes or Visqueen High-Bond where adhesive laps are needed.
Does it need primer?
Only on dusty concrete or block surfaces; otherwise fix mechanically with the stainless strip.
Delivery caveats?
Order before noon, spend £200 ex-VAT; see delivery information for Highlands & Islands surcharges.
Complete the non-combustible envelope
Vertical & horizontal fire stops – ARC Spandrel Barrier
A1 cavity weeps – Non-Combustible Weep Holes
Stainless restraint – Type 1 Wall Ties
Need CAD details or a toolbox talk? Contact us or ring 0118 922 7941—Spechunter will chase down every spec so you don’t have to.
Spechunter.co.uk – Chasing down specialist construction specifications since 1988. Fact Checked and Updated May 2025.
...